Back to the pond.
Prop shafts OK now. But WTC seal now not good. Air under pressure is takingthe easy way out.....
I had a neoprene gasket made but it seems to be too rigid. I have invested £2-99 on ebay for some neoprene tape- hopefully it will be softer & give a better seal.
I have also bought a couple of lead moulds from a fishing tackle shop to cast some ballast. Yet another skill that hopefully will be gained from this project.
ATB
Rob
Prop shafts OK now. But WTC seal now not good. Air under pressure is takingthe easy way out.....
I had a neoprene gasket made but it seems to be too rigid. I have invested £2-99 on ebay for some neoprene tape- hopefully it will be softer & give a better seal.
I have also bought a couple of lead moulds from a fishing tackle shop to cast some ballast. Yet another skill that hopefully will be gained from this project.
ATB
Rob
Yesterday at 3:26 pm by geofrancis
» Peral Submarine of 1888
Mon May 06, 2024 11:16 am by david f
» Newbie needs advice!
Fri Apr 26, 2024 1:58 pm by david f
» Modulated electric fields for submarine communication in a "heads up" from Harry!
Sun Apr 21, 2024 6:09 am by geofrancis
» 868/915 Mhz as a viable frequency for submarines.
Wed Apr 10, 2024 5:48 am by tsenecal
» Laser cut Robbe U47 conversion
Tue Apr 09, 2024 3:40 pm by david f
» ExpressLRS - 868/915 Mhz equipment
Tue Apr 02, 2024 3:27 pm by tsenecal
» Information on camouflage patterns for German seahund
Fri Mar 15, 2024 4:36 pm by david f
» WW2 mini sub build
Tue Mar 12, 2024 1:56 pm by geofrancis