Hi... I can't build at the moment so I am messing about on the computer... just worked this out and I thought I would share it....
You can make the hull of a Type XXIII U boat at 1/25th scale with PVCu pipes...
At 1388mm long it is quite accurately 1/25th scale obviously this is just the central part, but the ends and the sail could be made quite easily in FG.
The pipe is readily available in 125mm (soil Pipe) and 110mm (Air Vent Pipe)
Lee
You can make the hull of a Type XXIII U boat at 1/25th scale with PVCu pipes...
At 1388mm long it is quite accurately 1/25th scale obviously this is just the central part, but the ends and the sail could be made quite easily in FG.
The pipe is readily available in 125mm (soil Pipe) and 110mm (Air Vent Pipe)
Lee
Yesterday at 11:02 am by stig58
» Cheap Arduino Auto leveler
Sat May 11, 2024 6:53 pm by 17b
» No reverse on Brushless ESC
Tue May 07, 2024 3:26 pm by geofrancis
» Peral Submarine of 1888
Mon May 06, 2024 11:16 am by david f
» Newbie needs advice!
Fri Apr 26, 2024 1:58 pm by david f
» Modulated electric fields for submarine communication in a "heads up" from Harry!
Sun Apr 21, 2024 6:09 am by geofrancis
» 868/915 Mhz as a viable frequency for submarines.
Wed Apr 10, 2024 5:48 am by tsenecal
» Laser cut Robbe U47 conversion
Tue Apr 09, 2024 3:40 pm by david f
» ExpressLRS - 868/915 Mhz equipment
Tue Apr 02, 2024 3:27 pm by tsenecal