this is a picture of a RF power amp that i have been building for the last few days it is for transmitting low frequency under water to the sub it will nock out 160 watts of rf that is alot of power i ran it into a dummy load for 3 hours and ran ok the last post was about something on high frequency 10ghz this is the other end of the scale low frequency
notice from the picture that i have still got to finish the unit off you can also see cpu cooler and they do a brillant job at cooling down componants that produce alot of heat and im afraid it dose
the unit has been mainly made from scrap bits
notice from the picture that i have still got to finish the unit off you can also see cpu cooler and they do a brillant job at cooling down componants that produce alot of heat and im afraid it dose
the unit has been mainly made from scrap bits
Yesterday at 11:02 am by stig58
» Cheap Arduino Auto leveler
Sat May 11, 2024 6:53 pm by 17b
» No reverse on Brushless ESC
Tue May 07, 2024 3:26 pm by geofrancis
» Peral Submarine of 1888
Mon May 06, 2024 11:16 am by david f
» Newbie needs advice!
Fri Apr 26, 2024 1:58 pm by david f
» Modulated electric fields for submarine communication in a "heads up" from Harry!
Sun Apr 21, 2024 6:09 am by geofrancis
» 868/915 Mhz as a viable frequency for submarines.
Wed Apr 10, 2024 5:48 am by tsenecal
» Laser cut Robbe U47 conversion
Tue Apr 09, 2024 3:40 pm by david f
» ExpressLRS - 868/915 Mhz equipment
Tue Apr 02, 2024 3:27 pm by tsenecal