well that was a fail, I started doing some basic tests but the barometer kept slowly moving indicating a leak, I gave it a coat of superglue but the leak remained. So I eventually just put the whole thing underwater to see where it was coming from, to my surprise the connector started bubbling. turns out the air was going though the wires insulation to the outside. so this time i have stripped it down and conformal coated the whole board apart from the sensor ports, this should also seal around the wires.
Who is online?
In total there are 3 users online :: 0 Registered, 0 Hidden and 3 Guests
None
Most users ever online was 180 on Tue Nov 05, 2019 6:03 am
Latest topics
Search
Most Viewed Topics
Statistics
Our users have posted a total of 12456 messages in 1984 subjects
We have 1012 registered users
The newest registered user is Tony 51
Similar topics
4 posters
Flight controllers as sub levelers
geofrancis- Posts : 291
Join date : 2021-09-24
- Post n°51
Re: Flight controllers as sub levelers
david f likes this post
geofrancis- Posts : 291
Join date : 2021-09-24
- Post n°52
Re: Flight controllers as sub levelers
david f likes this post
17b- Posts : 9
Join date : 2023-06-19
- Post n°53
Re: Flight controllers as sub levelers
Does it work now as expected?
geofrancis likes this post
geofrancis- Posts : 291
Join date : 2021-09-24
- Post n°54
Re: Flight controllers as sub levelers
17b wrote:Does it work now as expected?
I have been giving it some time for the glue to cure before I do any testing but it looks good when i give it a little pressure as its not changing over time. im going to try and get it installed in the sub and tested sometime this weekend. i still need to program the inav controller logic switches to operate the ballast pump. My plan is to have a 3 position switch that changes the output so it can switch between static and dynamic diving depth control, and I still need to install the depth sounder too.
david f and SimonH like this post
17b- Posts : 9
Join date : 2023-06-19
- Post n°55
Re: Flight controllers as sub levelers
Are you going to use telemetry as feedback?
geofrancis likes this post
geofrancis- Posts : 291
Join date : 2021-09-24
- Post n°56
Re: Flight controllers as sub levelers
17b wrote:Are you going to use telemetry as feedback?
yes im running a frsky r9 868mhz receiver with telemetry.
Today at 12:54 am by stig58
» Cheap Arduino Auto leveler
Sat May 11, 2024 6:53 pm by 17b
» No reverse on Brushless ESC
Tue May 07, 2024 3:26 pm by geofrancis
» Peral Submarine of 1888
Mon May 06, 2024 11:16 am by david f
» Newbie needs advice!
Fri Apr 26, 2024 1:58 pm by david f
» Modulated electric fields for submarine communication in a "heads up" from Harry!
Sun Apr 21, 2024 6:09 am by geofrancis
» 868/915 Mhz as a viable frequency for submarines.
Wed Apr 10, 2024 5:48 am by tsenecal
» Laser cut Robbe U47 conversion
Tue Apr 09, 2024 3:40 pm by david f
» ExpressLRS - 868/915 Mhz equipment
Tue Apr 02, 2024 3:27 pm by tsenecal