How hard would it be to build a simple remote based on acoustics rather than radio waves?
What I have in mind goes like this, transmitter sends out acoustic waves via submerged transducer which is pick up by a receiver on the sub.
Something like what the single channel remotes of old but use an arduino to encode and decode the signals.
1 beep - forward
2 beeps- stop
3 beeps- turn left
4 beeps- center
5 beeps- turn right
6 bèeps- dive planes up
7 beeps- dive planes neutral
8 beeps- dive planes down
9 beeps- ballast vent
10 beeps- ballast blow
What I have in mind goes like this, transmitter sends out acoustic waves via submerged transducer which is pick up by a receiver on the sub.
Something like what the single channel remotes of old but use an arduino to encode and decode the signals.
1 beep - forward
2 beeps- stop
3 beeps- turn left
4 beeps- center
5 beeps- turn right
6 bèeps- dive planes up
7 beeps- dive planes neutral
8 beeps- dive planes down
9 beeps- ballast vent
10 beeps- ballast blow
Tue May 07, 2024 3:26 pm by geofrancis
» Peral Submarine of 1888
Mon May 06, 2024 11:16 am by david f
» Newbie needs advice!
Fri Apr 26, 2024 1:58 pm by david f
» Modulated electric fields for submarine communication in a "heads up" from Harry!
Sun Apr 21, 2024 6:09 am by geofrancis
» 868/915 Mhz as a viable frequency for submarines.
Wed Apr 10, 2024 5:48 am by tsenecal
» Laser cut Robbe U47 conversion
Tue Apr 09, 2024 3:40 pm by david f
» ExpressLRS - 868/915 Mhz equipment
Tue Apr 02, 2024 3:27 pm by tsenecal
» Information on camouflage patterns for German seahund
Fri Mar 15, 2024 4:36 pm by david f
» WW2 mini sub build
Tue Mar 12, 2024 1:56 pm by geofrancis