The Association of Model Submariners.

Would you like to react to this message? Create an account in a few clicks or log in to continue.

* THE FORUM FOR ALL THOSE INTERESTED IN BUILDING AND OPERATING MODEL SUBMARINES *



Join the AMS - Registered Forum users can become members of the AMS and it's free ...... To join send an email with your name , address and phone number to amstreasure@googlemail.com


For a guide to past events see the "Shows and Events" section.

Papplewick Pumping Station SUBMARINE Day. 31st March - 1st April 2024.

$$$

&&&

::::

Who is online?

In total there is 1 user online :: 0 Registered, 0 Hidden and 1 Guest

None


Most users ever online was 180 on Tue Nov 05, 2019 6:03 am

Latest topics

» U-Boat R/C?
Dorji 1278 BDM modules for 458Mhz - Not working EmptyToday at 12:54 am by stig58

» Cheap Arduino Auto leveler
Dorji 1278 BDM modules for 458Mhz - Not working EmptySat May 11, 2024 6:53 pm by 17b

» No reverse on Brushless ESC
Dorji 1278 BDM modules for 458Mhz - Not working EmptyTue May 07, 2024 3:26 pm by geofrancis

» Peral Submarine of 1888
Dorji 1278 BDM modules for 458Mhz - Not working EmptyMon May 06, 2024 11:16 am by david f

» Newbie needs advice!
Dorji 1278 BDM modules for 458Mhz - Not working EmptyFri Apr 26, 2024 1:58 pm by david f

» Modulated electric fields for submarine communication in a "heads up" from Harry!
Dorji 1278 BDM modules for 458Mhz - Not working EmptySun Apr 21, 2024 6:09 am by geofrancis

» 868/915 Mhz as a viable frequency for submarines.
Dorji 1278 BDM modules for 458Mhz - Not working EmptyWed Apr 10, 2024 5:48 am by tsenecal

» Laser cut Robbe U47 conversion
Dorji 1278 BDM modules for 458Mhz - Not working EmptyTue Apr 09, 2024 3:40 pm by david f

» ExpressLRS - 868/915 Mhz equipment
Dorji 1278 BDM modules for 458Mhz - Not working EmptyTue Apr 02, 2024 3:27 pm by tsenecal

Search

 
 

Display results as :
 

Rechercher Advanced Search

Most Viewed Topics

UHF radio control for submarines (openLRS, LoRa, FSK etc. on 458Mhz and 433Mhz )
Piston Ballast Systems
CSS HUNLEY
Moebius Skipjack
Das U-Boot im color
CSS PIONEER
New project - USS Nautilus
Skipjack.part 2
Engel U177 IX D2
Revell 1:72 VIIC u-boat

Statistics

Our users have posted a total of 12456 messages in 1984 subjects

We have 1012 registered users

The newest registered user is Tony 51

Similar topics

2 posters

    Dorji 1278 BDM modules for 458Mhz - Not working

    david f
    david f
    david f
    AMS Treasurer


    Posts : 2400
    Join date : 2010-11-10
    Age : 73
    Location : Cumbria
    • Post n°1

    Dorji 1278 BDM modules for 458Mhz - Not working Empty Dorji 1278 BDM modules for 458Mhz - Not working

    Post  david f Thu Nov 11, 2021 1:02 pm

    Hi All,

    I bought these a few months ago, when we we were doing the early work on LoRa. I did some successful configuration of them using the UART-to-USB converter board DAC02 from Dorji and then put them to one side.

    In the last week, following the discussions with Geofrancis, it occurred to me that they could be a simple way of converting an off the shelf transmitter to 433 or 458Mhz by sending ppm data from the trainer plug.

    I fell at the first hurdle! I can't configure them any more. Using the DRF software, I click on Open and then Read All and all I get is a Time Out Error.

    Any one out there got any suggestions? The EN pin is pulled low with a link and I don't think I have damaged them.

    David

    geofrancis likes this post

    • Back to top
    SimonH
    avatar
    SimonH


    Posts : 91
    Join date : 2020-09-29
    Location : Nottingham, UK
    • Post n°2

    Dorji 1278 BDM modules for 458Mhz - Not working Empty Re: Dorji 1278 BDM modules for 458Mhz - Not working

    Post  SimonH Fri Nov 12, 2021 5:26 pm

    Hi,
    Any indications of which bit is generating the timeout error? Assuming its a PC talking to the module via the USB/UART converter to me it looks as if it could be either the PC s/ware timing out due to lack of response (can you check the USB/UART converter on something else?, is it set to pass/connect power?) or the MCU not tallking back to the PC. If it was a failure of the MCU-RF link I would expect some kind of functionality from the PC app.
    Do you get the same error with no module connected?
    Do you get the same error with both modules (if you have more than one)
    Sound obvious but is there power on the module and is it the correct voltage, some USB converters can generate none/3.3v/5v depending on links.
    Beyond that I would be getting a scope out!

    david f likes this post

    • Back to top
    david f
    david f
    david f
    AMS Treasurer


    Posts : 2400
    Join date : 2010-11-10
    Age : 73
    Location : Cumbria
    • Post n°3

    Dorji 1278 BDM modules for 458Mhz - Not working Empty Re: Dorji 1278 BDM modules for 458Mhz - Not working

    Post  david f Mon Nov 15, 2021 9:59 am

    Thanks Simon.

    I have worked my way through most of your list i.e.
    - I have used another USB/UART convertor and I get the same time out error with both of the modules.
    - I have also used the ADVANCED SERIAL PORT MONITOR software recommended by Dorji. This returns the name of the device on power up but otherwise doesn't "talk".

    I found the comments on the Dorji by jgrome interesting (see below) and maybe the Dorji device is a bit of a dead end for our purposes. We have had a lot of success with the bare SX1278 already.

    If any of the past contributors to this thread would like a couple of the Dorji devices (probably working?!) free to "have a go with" I will happily post them on to you. (UK preferred)

    https://github.com/jgromes/RadioLib/issues/20

    "jgromes commented on Jun 8, 2019 •
    As is explained in LoRaLib contributing doc, that library is intended as a driver for bare SX127x radios. The one you have has a UART interface.

    This library (RadioLib) was based on LoRaLib, and extended to cover all sorts of wireless modules - including those with UART interfaces. However, I don't plan on adding support for DRF1278DM, for the following reasons:

    1. Some users could be confused over what interface to use with SX127x - SPI or UART.
    2. DRF1278DM isn't the only UART SX1278-based module out there, with different incompatible UART command sets (e.g. RN2903).
    3. The UART interface only offers a very limited set of functions, when compared to bare SX1278. (e.g. no CAD, no interrupts, no FSK modem etc.)
    4. Most people use the bare SX1278. "
    • Back to top

      Current date/time is Fri May 17, 2024 3:01 am