I am in the process of wiring in the esc's for my Engel type IX and am wondering if it would be OK to go on just one esc because with the two units I find that one of the motors runs much slower than the other.
The units I have are the Mtroniks Viper Sub10 which has a 40A motor limit and I want to run one on BEC. Would having both esc's wired in with one on BEC and the other with the relevant lead disconnected be the cause of uneven running or can someone come up with another solution
Thanks in advance
Peter Webster
The units I have are the Mtroniks Viper Sub10 which has a 40A motor limit and I want to run one on BEC. Would having both esc's wired in with one on BEC and the other with the relevant lead disconnected be the cause of uneven running or can someone come up with another solution
Thanks in advance
Peter Webster
Today at 12:54 am by stig58
» Cheap Arduino Auto leveler
Sat May 11, 2024 6:53 pm by 17b
» No reverse on Brushless ESC
Tue May 07, 2024 3:26 pm by geofrancis
» Peral Submarine of 1888
Mon May 06, 2024 11:16 am by david f
» Newbie needs advice!
Fri Apr 26, 2024 1:58 pm by david f
» Modulated electric fields for submarine communication in a "heads up" from Harry!
Sun Apr 21, 2024 6:09 am by geofrancis
» 868/915 Mhz as a viable frequency for submarines.
Wed Apr 10, 2024 5:48 am by tsenecal
» Laser cut Robbe U47 conversion
Tue Apr 09, 2024 3:40 pm by david f
» ExpressLRS - 868/915 Mhz equipment
Tue Apr 02, 2024 3:27 pm by tsenecal