Whilst waiting for some epoxy to cure on the Skipjack, I thought I'd have a quick look at the Type XX111...as you do.
Three quarters of an hour and half a roll of masking tape later, the epoxy had gone rock hard, and I'd just finished getting the four sections of the hull to go together...damn thing looks like an Egyptian mummy now! The language was appalling, and so was the fit of the parts...I'll not be building this for a long while yet.
Three quarters of an hour and half a roll of masking tape later, the epoxy had gone rock hard, and I'd just finished getting the four sections of the hull to go together...damn thing looks like an Egyptian mummy now! The language was appalling, and so was the fit of the parts...I'll not be building this for a long while yet.
Today at 1:00 pm by david f
» U-Boat R/C?
Yesterday at 11:02 am by stig58
» Cheap Arduino Auto leveler
Sat May 11, 2024 6:53 pm by 17b
» No reverse on Brushless ESC
Tue May 07, 2024 3:26 pm by geofrancis
» Newbie needs advice!
Fri Apr 26, 2024 1:58 pm by david f
» Modulated electric fields for submarine communication in a "heads up" from Harry!
Sun Apr 21, 2024 6:09 am by geofrancis
» 868/915 Mhz as a viable frequency for submarines.
Wed Apr 10, 2024 5:48 am by tsenecal
» Laser cut Robbe U47 conversion
Tue Apr 09, 2024 3:40 pm by david f
» ExpressLRS - 868/915 Mhz equipment
Tue Apr 02, 2024 3:27 pm by tsenecal