Be ADVICE : Is gonna be a very long thread so PLEASE have patience !
Earlier this week I took courage and I start working on these project .
That is a LOS ANGELES submarine bought it from someone on the forum .
- I started with rudders depth as required for the large volume of Sisyphus work ....
- after many, many hours of sanding an file I managed to do what you can see in the pictures...
HOW TO FIX :
1) file until get same length?
2) fill until get same length ?
- then continued with bow rudders ....NO problems here ,
- with tower is another story and I have some questions about the place to put axis for Bow Rudders ....( see pictures )
- I do not know what those two parts are and which should be put it ( see pictures )
and the last question from these series :
1) what are those holes and witch should be drilled ( I think some of them should be don do the captive air !)
OK for now,
THANK YOU
MARIUS
Wed Apr 10, 2024 5:48 am by tsenecal
» Modulated electric fields for submarine communication in a "heads up" from Harry!
Tue Apr 09, 2024 7:33 pm by geofrancis
» Laser cut Robbe U47 conversion
Tue Apr 09, 2024 3:40 pm by david f
» ExpressLRS - 868/915 Mhz equipment
Tue Apr 02, 2024 3:27 pm by tsenecal
» Information on camouflage patterns for German seahund
Fri Mar 15, 2024 4:36 pm by david f
» WW2 mini sub build
Tue Mar 12, 2024 1:56 pm by geofrancis
» Not the hobby I expected :)
Sun Mar 10, 2024 6:30 pm by cat
» Sheerline gasket material
Mon Feb 19, 2024 9:24 pm by Michaelc
» Choice of CAD software and Printer for 3D printing
Thu Feb 15, 2024 1:53 pm by david f